Washington DC

Lead dust cleaning services in DC: what the crew does and when cleaning is enough

Published November 15, 2026 · All articles

Lead dust cleaning services remove the fine lead dust that renovation work and old windows leave behind on floors and in window troughs. A certified crew runs a HEPA vacuum before and after a detergent wet wash, then an independent examiner takes dust wipes to prove it worked. In DC the floor has to come in under 10 micrograms per square foot.

That is the short version. The longer one matters because most people who call us for cleaning have already had the place cleaned once, sometimes twice, by a regular crew, and it failed anyway.

What do lead dust cleaning services actually do?

They follow a fixed order that a janitorial crew does not, and the order is the whole trick. On a typical DC rowhouse unit after a kitchen gut or a window job, it goes like this.

  1. Pick up the debris first. Paint chips and plastic sheeting are misted, then bagged with the dirty side folded in. No dry sweeping. A broom puts the dust back in the air.
  2. HEPA vacuum from the top down. Ceilings and walls if work touched them, then each window down to the trough, then baseboards, then floors. Radiators and floor registers get opened up.
  3. Wet wash with detergent. Every horizontal surface gets wiped with a fresh cloth or disposable wipe, changed often. One rag carried from room to room just moves lead around.
  4. Rinse with clean water. Separate buckets for wash and rinse, and the water is changed for each room.
  5. HEPA vacuum again once it is dry. The second pass picks up what the wash loosened.
  6. Bag the waste and leave. Then someone who did not do the cleaning takes the dust wipes.

Old pine floors with open gaps between the boards and double hung windows with painted troughs are where the dust hides. A crew that knows this spends half its time on the windows.

Can I clean up lead dust myself with a shop vac?

No, not with a shop vac. A standard shop vacuum or household upright traps the chips you can see and blows the fine dust straight through its filter and back into the room. That fine dust is what a toddler picks up on hands and toys, and it is what the lab measures. A true HEPA vacuum holds it.

For ordinary upkeep in a pre-1978 house with intact paint, you can do a lot yourself. Wet wipe the window sills and troughs every week or two with disposable towels. Damp mop instead of sweeping. Where homeowners get into trouble is after real disturbance: a floor sanded down through old paint, or a painter who dry scraped the trim. That cleanup needs the equipment and the test afterward.

When cleaning is enough, and when it is not

Cleaning removes dust that is already there. It does nothing about the source. If the source is still shedding, the dust is back within weeks and the next wipe fails again.

What is going onWill cleaning alone pass it?What it really needs
Failed clearance after a renovation, paint now intactUsually yesFull HEPA and wet wash cycle, then a retest of the failed samples
Original double hung windows that rub when they openFor a few weeksWindow repair or replacement, then cleaning
Peeling or chipping paint on trim or stair treadsNoPaint correction by a certified crew first. The visual check fails before any wipe is taken
Child with a high blood lead levelNot as a first stepA risk assessment to find the source, then correction and cleaning
Dust tracked in from bare soil along an old foundationPartlyCleaning, plus covering the soil and a mat at each door

The window row is the one we see most. Our article on old windows and lead paint explains why a sash that slides against a painted jamb makes new dust every time someone opens it.

The numbers a cleaning has to hit

A cleaning passes when lab analyzed dust wipes come back under the clearance levels. Those levels are small and they have been dropping.

SurfaceFederal clearance level through 2024EPA level in the October 2024 rule
Floors10 micrograms per square foot5
Window sills10040
Window troughs400100

The figures come from the EPA page on dust lead clearance levels. DC runs its own program through the Department of Energy and Environment, and DC clearance exams have held floors to 10. Ask your examiner which numbers your report will be measured against before the crew starts. A cleaning aimed at 10 can miss at 5, and for a sense of scale, a sugar packet of lead dust spread evenly would put dozens of rooms over either number.

What lead dust cleaning costs

Less than paint correction, and the price depends on the unit more than the square footage. These are the things that move it.

The testing side has a published price. Dust wipe sampling is $395 per unit with lab fees, listed on our cost pagenext to everything else we charge for. The cleaning itself we quote in writing after seeing the unit or the failed report, because a vacant one bedroom with sealed floors and a furnished four level rowhouse are different jobs. Call with the address and you'll get a number for yours.

Who should not hire a lead dust cleaning service

If your house was built after 1978, you almost certainly don't need one. If it is older with intact paint and nobody has tested anything, start with the $395 dust wipe sampling instead of a cleaning. Plenty of units pass as they are. And if paint is actively peeling, don't pay for cleaning yet. Fix the paint first or you will pay for the cleaning twice.

How we handle it in DC and Montgomery County

We run the cleaning with certified crews and bring in an independent examiner for the wipes, so the company that cleaned is never the one grading the result. If a unit fails, we go back to the surface that failed and the retest covers those samples. For DC landlords this is usually the last step before a clearance report, which our clearance exam guide walks through. Testing and correction work in the District are both on our Washington DC lead services page.

Failed a dust wipe, or about to renovate?

Send the address and the lab report if you have one. We will tell you if cleaning alone will pass it, and quote the job in writing.

Get a lead quote

Or call (301) 610-3977. Free, written, no obligation.

Get a Lead QuoteCall